Navigation; Vnm ® 4 Pro Templates - Cobra Systems VNM 4 Pro SignMaker User Manual

VnM®4 Pro Display Screen Navigation
50m 10.0.10.125
TX200
Menu
Main Menu
VnM Templates
Printer Settings
Tech Support Card
Back
VnM®4 Pro SignMaker Templates
VnM Templates 4"
1-5 Lines Horizontal
1 Line Horz. with Header
VnM Templates 4"
1 Line Vertical
Custom 1 Line
Custom 1 Line
Back
OSHA/ANSI Templates
VnM Templates 4"
GHS Templates
RTK Labels
RTK Labels
Back
Pipe Marking Templates
Barcode Templates
Formatted Signs
Back
03:30 AM
A2.11CBR6 EZD
Feed
Select
Select
DIE CUT
DIE CUT
DIE CUT
Select
Select
Copyright © 2020 Cobra Systems, Inc. All rights reserved
The VnM®4 Pro navigation tree on the left
displays the flow and order of all the avail-
able options/templates.
To begin printing, let's first power up your
printer. Once on, Select VnM Templates
and select the size of media that is loaded
in the printer.
Detailed information about each template
starts on page 10.
Choose Label Size
4"
3"
2"
1"
Back
Use the UP and DOWN arrow keys on the
VnM®4 Pro Keyboard to navigate through
the templates.
Press the ENTER key to select your template
or to continue to the next prompt.
If you would like to return to the
previous screen or an entry error has
been made, press the ESC key and
re-enter the information.
Esc
Select
Enter
8