Home Styles Storage Island 88 5530 942 Manual

Advertisement

88 5530 942
Storage Island
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.

Part List

B.
Bottom
1 pc.
C.
Plinth
2 pcs.
F.
Shelf
6 pcs.

Hardware List

M6x35
Cam Lock
Bolt
40 pcs.(+6 extra)
6 pcs. (+1 extra)
Cam Lock Screw
Flat Washer
40 pcs.(+1 extra)
6 pcs. (+1 extra)
For assembly see instructions in carton 88 5530 941, 88 5530 943
Tools required for assembly: Phillips screwdriver, Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
Adjustable Pin
24 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
for Drawer Bottom
60 pcs. (+1 extra)
servicedesk@homestyles-furniture.com
D.
Back Panel
1 pc.
G.
Front Rail
4 pcs.
M3x25
M4x28
Wood Screw for
Machine Screw
Side Panels
20 pcs.
4 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
Knob (small)
for Drawer Side
8 pcs.
80 pcs. (+1 extra)
E.
Back Panel
1 pc.
Knob (large)
12 pcs.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Storage Island 88 5530 942 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Home Styles Storage Island 88 5530 942

  • Page 1 6 pcs. (+1 extra) 8 pcs. 60 pcs. (+1 extra) 80 pcs. (+1 extra) For assembly see instructions in carton 88 5530 941, 88 5530 943 Tools required for assembly: Phillips screwdriver, Level Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319 servicedesk@homestyles-furniture.com...
  • Page 2 Assembly Instructions 2/7 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * Use a soft cloth between these parts and the floor. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. Cam Lock Screw STEP 1 Put Cam Lock Screws into...
  • Page 3 Assembly Instructions 3/7 STEP 2 Attach Back Panels (D) and (E) to Middle Panel (J) using Cam Locks. (see Figure 2) Attach Front Rails (G) to unit. Cam Lock Bolt Flat Washer Figure 2 Figure 3 STEP 3 Attach Bottom (D) to unit with Flat Washers and Bolts.
  • Page 4 Assembly Instructions 4/7 Cam Lock STEP 4 Attach Plinths (C) to unit with Cam Locks. Attach Leg Support (K) to unit. Cam Lock Wood Screw Wood Screw for Side Panels for Side Panels STEP 5 Attach Side Panels (H) and (I) to unit with Cam Locks and Wood Screws for Side Panels.
  • Page 5 Assembly Instructions 5/7 STEP 6 Attach Top (A) to unit with Cam Locks. Cam Lock STEP 7 Insert Adjustable Pins into side panels and middle panel at desired level, then place shelves (F) into position. Adjustable Pin STEP 8 Figure 4 Slide Drawers (L) and (M) into position.
  • Page 6 Assembly Instructions 6/7 Drawer L (Figure 1) STEP 2 STEP1 Slide L5 into the grooves in L3 Attach L1 to L3 and L4, using and L4. Be sure to push L5 all MAKE SURE ROLLER Phillips screwdriver IS ON THE BACK the way forward so it meets L1.
  • Page 7 Assembly Instructions 7/7 Drawer M (Figure 1) STEP 2 STEP1 Slide M5 into the grooves in M3 Attach M1 to M3 and M4, using and M4. Be sure to push M5 all MAKE SURE ROLLER Phillips screwdriver IS ON THE BACK the way forward so it meets M1.

Table of Contents