Securing On Mounting Rail - Beckhoff CX8110 Manual

Commissioning
5.1.3

Securing on mounting rail

The housing is designed such that the Embedded PC can be pushed against the mounting rail and latched
onto it. The Embedded PC is fastened to the DIN rail by means of a catch on the left side of the Embedded
PC.
Requirements:
• Mounting rail of type TS35/7.5 or TS35/15 according to DIN EN 60715.
Secure the Embedded PC on the mounting rail as follows:
1. Place the Embedded PC at the front of the mounting rail. Slightly press the Embedded PC onto the
mounting rail until a soft click can be heard and the Embedded PC has latched.
CX8110
TC
X001
WD
ERR
X101
X102
S101
2. Subsequently, lock the catch on the left side of the Embedded PC. Use a screwdriver to do this.
ð Double-check the correct installation and latching of the Embedded PC on the mounting rail.
22
24V 0V 24V 0V
24V 0V 24V 0V 24V 0V 24V 0V
24V 0V
KLICK
+ + + +
+ + + + + + + +
+ +
- - - - - - - - - - - - - -
PE PE
PE PE PE PE PE PE PE PE PE PE PE PE PE PE
KL 1002 KL 1002 KL 2134 KL 2134 KL 9010 KL 9010
BECKHOFF BECKHOFF
BECKHOFF BECKHOFF BECKHOFF BECKHOFF
Version: 1.4 CX8110