Structure; Table 2 Legend For The Configuration; Fig. 1 Sample Configuration Of A Cx8110 Embedded Pc - Beckhoff CX8110 Manual

4.1

Structure

7
6
5
4
3
2
1
Fig. 1: Sample configuration of a CX8110 Embedded PC.
Table 2: Legend for the configuration.
No. Component
1
DIP switch [} 30] (S101).
2
Battery compartment
[} 64] (under the front
flap).
3
MicroSD card slot [} 18]
(under the front flap).
4
EtherCAT slave interfaces
RJ45 [} 15] (X101, X102).
5
Reset button [} 18]
6
Diagnostic LEDs [} 60].
7
Ethernet interface [} 15]
(X001).
8
Diagnostic LEDs, power
supply terminal [} 60].
9 Spring-loaded terminals,
+24 V and 0 V
10 Terminal bus (K-bus or E-
bus)
11 Spring-loaded terminal,
+24 V
12 Spring-loaded terminal, 0 V Power supply for Bus Terminals via power contact.
13 Terminal release
14 Spring-loaded terminal, PE Spring-loaded terminal for power contact PE.
15 Power contacts, +24 V,
0 V, PE
CX8110
8
9
10
11
12
13
14
15
Description
The DIP switches can be used to define the Explicit Device
Identification for the EtherCAT slave interfaces (X101, X102).
Power supply for the battery-backed clock for time and date.
Slot for industrial MicroSD cards.
EtherCAT In and EtherCAT Out for connection to an EtherCAT
master.
This switches the Embedded PC to Config mode.
Diagnostic LEDs. You can create your own diagnostic messages
for the WD and ERR diagnostic LEDs (see: Controlling CX8190
LEDs).
Interface for commissioning and programming the Embedded PC.
Diagnosis of the power supply for the Embedded PC and the
terminal bus. Status of the E-bus and K-bus communication.
Power supply for Embedded PC.
Interface for EtherCAT Terminals or Bus Terminals. Data exchange
and supply.
Power supply for Bus Terminals via power contact.
Releases the power supply terminal and therefore the Embedded
PC from the mounting rail.
Power contacts for Bus Terminals.
Version: 1.4
Product overview
10
13