Table of Contents
Advertisement
Switching wall control between Temperature and Timer Control Modes:
Switching wall control between Temperature and Timer Control Modes:
1. Switch wall control to Temperature Control from Timer Control mode:
a. Press MODE
MODE button on WTT then press DOWN ARROW
2. Switch wall control to Timer Control from Temperature Control mode:
a.
Press MODE
MODE button on WTT then press UP ARROW
FIGURE 11- WTT DISPLAY IN
TEMPERATURE CONTROL MODE
Temperature Control Mode: (refer to FIGURE 11)
Temperature Control Mode:
Turn the FAN ON:
Turn the FAN ON:
By pressing ON/OFF
ON/OFF button. The fan will run until the indoor temperature drops below the Set To
Temperature
Temperature on the WTT display. By pressing the ON/OFF
fan OFF.
Adjusting the Temperature:
Adjusting the Temperature:
Press
and hold the
Temperature setting.
Temperature
When the Set To Temperature
Set To Temperature is lower than the indoor temperature, the fan is ON and running (ON
is blinking). When the Set To Temperature
and ON is not blinking.
Safety Feature in Temperature Control Mode: The WTT ON/OFF
Safety Feature in Temperature Control Mode:
In addition, the WTT has a built-in safety timer that will automatically turn the fan OFF after 8 hours
of continuous operation in case the homeowner forgets the fan is running.
Adjust the Safety Feature Timer Hour Setting:
Adjust the Safety Feature Timer Hour Setting:
Press and hold MODE
MODE button for about 7 seconds until STimer is displayed. Press the ARROW UP
ARROW DOWN
ARROW DOWN button to adjust the safety timer hours from 1 to 12 hours.
Adjusting Speed Control Setting:
Adjusting Speed Control Setting:
Press the SPEED button then press the ARROW UP
Timer Control Mode: (refer to FIGURE 12)
Timer Control Mode:
Switch wall control to Timer Mode.
Turn the FAN ON:
Turn the FAN ON:
By pressing ON/OFF
ON/OFF button. The fan will run for Timer Interval on WTT display. By pressing the ON/
OFF
OFF button while fan is operating will turn the fan OFF.
P/N 780104100 07/20 Rev B
ARROW UP or ARROW DOWN
ARROW UP
ARROW DOWN buttons individually to change the Set To
Set To Temperature is above the indoor temperature, the fan is not running
ARROW UP or ARROW DOWN
page 14 of 20
DOWN ARROW button to select TEMPERATURE CONTROL.
UP ARROW button to select TIMER CONTROL.
FIGURE 12- WTT DISPLAY IN
ON/OFF button while fan is operating will turn the
ON/OFF button is pressed to turn the fan ON.
ARROW DOWN button to adjust the fan speed.
TEMPERATURE CONTROL.
TIMER CONTROL.
TIMER CONTROL MODE
ARROW UP or
Set To
Set To
ON/
Advertisement
Table of Contents
