Fluoride Filter Soak - Pentair PF6-P Manual

FLUORIDE FILTER SOAK

IMPORTANT
Your system will not be ready for use for a minimum of 48 hours while the Fluoride Filter Soak process takes place. Please
plan your installation accordingly.
Note
Water will flow out of the downflow inlet side of the Bypass Valve during this process. Be sure you perform this series of
steps in a location suitable for water flow.
Top View
1. Attach a garden hose to the Hose Bib Assembly.
2. Connect the Hose Bib Assembly to the upflow inlet side of the Bypass Valve and hand tighten.
3. Fill the Pentair Whole House Fluoride Filter Tank full until water comes out of downflow inlet side of the Bypass Valve.
4. Turn the water off.
5. Remove the garden hose from the Hose Bib Assembly. Do not remove the fitting.
6. Allow the carbon tank to soak for at least 48 hours prior to tank installation.
6 • FLUORIDE WATER FILTER SYSTEM
Garden
Hose
Hose Bib
Assembly
Bypass Valve
Water
INLET
Whole House Fluoride Filter