Pre-Installation - Pentair PF6-P Manual

PRE-INSTALLATION

Note
Head may come loose in transit. Please check head by tightening clock wise, hand tighten only, no more than
Head may not move at all or less than
Bypass Valve Installation
Top View
Figure 2
The bypass valve comes pre-assembled and ready to install with the o-rings, split rings, and quick connect nuts. Push the bypass valve
into the head of the Fluoride Filter with the unthreaded ends oriented toward the tanks and hand-tighten the quick connect nuts.
Note
The bypass valve(s) included with this system are designed for multiple water systems. This may result in the arrows on the bypass
valve(s) pointing differently than shown. If the arrows on your bypass valve(s) do not match the diagram, remove the red arrows by
pulling them straight up, turn them 180˚ to match the drawing, and push them back down onto the stem.
turn.
/
1
4
Red Arrow
Quick Connect Nut
Water Filter Head
Fluoride Filter
/ turn.
1
4
FLUORIDE WATER FILTER SYSTEM • 5