Before You Start; Initial Settings - Samsung NV75N5671BS User & Installation Manual

Installation
After installation is complete, remove the protective film, tape, and other packing
material, and take out the provided accessories from inside the oven. To remove
the oven from the cabinet, first disconnect power to the oven and remove
2 screws on both sides of the oven.
WARNING
The oven requires ventilation for normal operation. Do not block the vents under
any circumstance.
NOTE
The actual appearance of the oven may differ with the model.
10 English
NV75N5671RS_EU_DG68-01055C-01_EN+DE.indb 10

Before you start

Initial settings

When you power on the oven for the first time, the default time of "12:00" appears
on the display where the hour element ("12") blinks. Follow the steps below to set
the current time.
1. With the hour element blinking, turn the
2. With the minute element blinking, turn
To change the current time after this initial
setting, hold down the
3 seconds and follow the above steps.
value dial (right-sided dial) to set the
hour, and then press OK to move to the
minute element.
the value dial to set the minute, and
then press OK.
button for
2018-02-14 6:17:13