To Select Or Change Your Receive Mode; Setting The Ring Delay - Brother MFC-4800 User Manual

To Select or Change Your Receive Mode

1
Press Receive Mode. The LCD shows your active setting.
2
Continue to press Receive Mode until your new selection appears. After two
seconds, the LCD returns to the date and time and shows the new Receive Mode.
If you are changing the Receive Mode while in another operation, the LCD
returns to that operation.

Setting the Ring Delay

The Ring Delay setting determines the number of times the FAX/MFC rings
before it answers. If you have extension phones on the same line as the FAX/
MFC, keep the Ring Delay default setting of 04. (See
Operation from Extension Telephones
1
Press Menu/Set, 2, 1, 1.
2
Press or to select how many times the
line rings before the FAX/MFC answers (00–04), and then press Menu/Set.
If you select 00, the line doesn't ring at all.
3
Press Stop/Exit.
5 - 2
S E T U P R E C E I V E
Current Receive Mode
Easy Receive
and
For FAX/TEL Mode Only
, page 5-3 and
, page 5-5.)