Setting Volume Amplify; Memory Storage - Brother MFC-4800 User Manual

WARNING
It is important that you do NOT choose
users are hearing-impaired. Otherwise, the default setting of
damage the hearing of some users.

Setting Volume Amplify

Please carefully read Choosing the Handset Volume on page 4-5 before you do
the following steps:
1
Press Menu/Set, 1, 4, 5.
2
If none of the users are hearing-impaired,
press to select
or
to Step 4—OR—
If some or all of the users are hearing-impaired, select
and then press Menu/Set.
3
If all the users are hearing-impaired,
press to select PERMANENT?,
or
and then press Menu/Set—OR—
If only some of the users are hearing-impaired,
select TEMPORARY?, and then press
Menu/Set.
4
Press Stop/Exit.

Memory Storage

In the event of a power failure, all settings in the
RECEIVE, SET AUTO DIAL, SETUP REPORTS, REMOTE FAX
plus the COVERPG SETUP
SEND) are stored permanently. You may have to reset the date and time.
FAX-2900 and FAX-3800 have a Memory Backup feature; after a power failure
all faxes in memory will be saved for several days.
VOL AMPLIFY:OFF?, and then press Menu/Set and go
and COVERPAGE MSG
PERMANENT unless ALL the
VOL AMPLIFY:ON?,
GENERAL SETUP, SETUP
settings (from
I N I T I A L S E T U P
AMPLIFY may
OPT,
SETUP
4 - 6