Cover Page For The Next Fax Only; Always Send A Cover Page - Brother MFC-4800 User Manual

Cover Page for the Next Fax Only

Make sure the Station ID is set up (see page 4-2). This feature does not work
without the Station ID.
You can set the fax to send a cover page with a particular document. This cover
page will include the number of pages in your document.
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 8.
3
When LCD shows
and then press Menu/Set.
4
Press to select
or
5
Press to select one of the standard or custom comments, and then press
or
Menu/Set.
6
Enter two digits to indicate the number of pages you are sending, and then press
Menu/Set. (For example, press 0, 2 for 2.)
(Enter 0 0 to leave the number of pages blank. If you make a mistake, press
to back up and re-enter the number of pages.)
7
Press 1 if you want to select additional settings. The LCD returns to the
SEND menu—OR—Press 2 if you are finished choosing settings.
8
Enter the fax number you're calling.
9
Press Fax Start.

Always Send a Cover Page

Make sure the Station ID is set up (see page 4-2). This feature does not work
without the Station ID.
You can set the FAX/MFC to send a cover page whenever you send a fax. The
number of pages in your fax is not included when you use this setting.
1
Press Menu/Set, 2, 2, 8.
2
to select COVERPAGE:ON?, and then press Menu/Set.
Press
or
3
If you selected ON, press
comments, and then press Menu/Set.
4
Press 1 if you want to select additional settings. The LCD returns to the
menu—OR—Press 2 to exit if you are finished choosing settings.
SEND
6 - 7
S E T U P S E N D
NEXT FAX ONLY?,
ON (or OFF), and then press Menu/Set.
to select one of the standard or custom
or
SETUP
SETUP