Attaching The Mounting Plate - HAMPTON BAY DEVEREAUX II Use And Care Manual

Assembly — Attaching the Mounting Plate
12

Attaching the mounting plate

□
Remove one of the three screws (MM) from the
mounting ring (NN) and loosen the other two screws
(MM). (Do not remove.)
□
Place the key holes on the mounting plate (G) over
the two screws (MM) previously loosened from the
mounting ring (NN). Turn the mounting plate (G) until
it locks in place at the narrow section of the key
holes. Secure by tightening the two screws (MM)
previously loosened and the one (MM) previously
removed.
□
Snap the wire connection plugs (OO) together.
NN
14
MM
OO
G