Page 4
We warrant the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period of lifetime after the date of purchase by the original purchaser. And we warrant the LED light kit to be free from defects in workmanship and material present at time of shipment from the factory for a period of 3 years after the date of purchase by the original purchaser.
Page 6
Flywheel Light kit plate 17W LED assembly (longer downrod not included)
Page 8
Attach the mounting bracket (B) to the outlet box with two screws and washers provided with the outlet box. Make sure the mounting bracket (B) is tightened securely. Attaching the flywheel and downrod to the fan motor assembly Tighten the flywheel (I) onto the bottom of the fan motor assembly (H) by using the three flywheel screws (CC). Loosen the two set screws (II) from the coupling of the fan motor assembly (H).
Page 13
Installing the light kit plate to the fan motor assembly Remove one of the screws (KK) from the locking Insert the blade (A) through the slot on the fan plate of the fan motor assembly (H) and loosen the motor assembly (H). other two screws (KK), but do not remove.
Page 14
Installing the LED assembly to Installing the glass the light kit plate Attach the glass (L) to the light kit plate (J) by twisting Remove one of the screws (LL) from the light kit plate (J) tightly. (DO NOT OVERTIGHTEN) and loosen the other two screws (LL), but do not remove.
Page 15
Reverse Function The reverse switch (QQ) is located on the fan motor assembly (H). down...
Page 17
Check the wires with the molex plugs to ensure proper connection. Balancing kit included additional instruction manual within the packet.
Page 18
Fiber washer Flywheel screw Flywheel Light kit plate Light kit plate screw (preassembled) 17W LED assembly LED assembly screw (preassembled) Remote control holder mounting screw (longer downrod not included)