Attaching The Fan Blades - HAMPTON BAY DEVEREAUX II Use And Care Manual

Assembly — Attaching the Fan Blades
Attaching the blades to
10
the blade arms
NOTE: Your fan blades are reversible. Select the blade side
finish which best accentuates your decor.
□
Attach the blade (K) to the blade arm (L) using the
three blade attachment screws with rubber washers
(BB). Start a screw and rubber washer (BB) into the
blade arm (L), but do not tighten.
□
Repeat for the remaining blade attachment
screws and rubber washers (BB).
□
Tighten each screw securely starting with the center
screw. Make sure the blade (K) is straight.
□
Repeat these steps for the remaining blades (K).
BB
11
□
□
□
K
L
LL
13
Fastening the blade
assemblies to the motor
WARNING: To reduce the risk of personal injury, do not
bend the blade arms (L) while installing, balancing the blades
(K), or cleaning the fan. Do not insert foreign objects between
rotating fan blades (K).
Fasten the blade assemblies to the fan motor
assembly (F) by lining up the slots of the blade arms
(JJ) with the tabs on the motor (KK).
Tighten the blade arm screws with lock washers (LL)
already installed in the blade arms (L).
Repeat this procedure for the remaining blade arms
(L).
JJ
Please contact 1-855-HD-HAMPTON for further assistance.
F
K
KK
L
HAMPTONBAY.COM