Installations; Installing The Memory - IBASE Technology MT800M-AIC User Manual

2.1

Installations

2.1.1

Installing the Memory

To install the modules, locate the memory slot on the board and perform the
following steps:
1. Press the ejector tabs of the memory slot down and outwards with
your fingertips.
2. Hold the meomry module and align the key of the module with that on
the memory slot.
3. Gently push the module in an upright position until the ejector tabs of
the memory slot close to hold the module in place when the module
touches the bottom of the slot.
To remove the module, press the ejector tabs outwards with your fintertips
to eject the module.
12 MT800M-AIC User's Manual