Guide Roller Assembly - Power Fist SKX355D-120 User Manual

8957102 14 in. Electric Wet/Dry Concrete Saw V4.0
there is no water flow to the blade, then clean out the water feed system on the
machine.

GUIDE ROLLER ASSEMBLY

The guide rollers make it easier to
keep the blade plane perpendicular to
the workpiece. To install, slacken the
butterfly bolt slightly and engage the
four claws with the four eyelets on
the bottom of the motor housing,
then tighten the butterfly bolt. Note
that roller assembly is offset to one
side to avoid contacting the blade, so
it may only be installed in one
orientation. If it is not needed, the guide roller assembly may be removed and
set aside.
FLUSH CUTTING KIT
INSTRUCTIONS
(Optional) The flush cutting kit
enables a flush cut blade (not
included) to be mounted to the
machine which allows flush cuts to
be made while the outer blade guard
is temporarily removed. The flush cut
blade may be left in place and the
operator may return to standard
cutting simply by replacing the outer
blade guard and securing with the 4 toggle latches. In this way, it is quick and
convenient to switch between standard and flush cutting mode. Or if desired,
the flush cutting blade and flange may be removed and the machine returned to
the standard configuration.
14 For technical questions call 1-800-665-8685