Specifications - Stihl MSA 120 C Instruction Manual

English
19.2 Troubleshooting Charger
Condition LED on Char‐
ger
Battery not being LED flashes
charged. red.

20 Specifications

20.1 STIHL MSA 120 C, MSA 140 C
Chainsaws
MSA 120 C
– Approved battery: STIHL AK
– Weight without battery, guide bar and saw
chain 2.3 kg
– Max. oil tank capacity: 110 cc (0.11 l)
MSA 140 C
– Approved battery: STIHL AK
– Weight without battery, guide bar and saw
chain 2.3 kg
– Max. oil tank capacity: 110 cc (0.11 l)
For battery life see www.stihl.com/battery-life.
20.2 Chain Sprockets and Chain
Speeds
MSA 120 C
The following chain sprockets may be used:
6-tooth for 1/4" P
– Maximum chain speed according to
ISO 11681: 14.0 m/s
MSA 140 C
The following chain sprockets may be used:
6-tooth for 1/4" P
– Maximum chain speed according to
ISO 11681: 14.0 m/s
20.3 Minimum groove depth of guide
bars
The mininum groove depth depends on the pitch
of the guide bar.
– 1/4" P 4 mm
20.4 STIHL AK Battery
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: -10°C to +50°C
60
Cause
No electrical contact
between charger and
battery.
Malfunction in char‐
ger.
20.5
– Rated voltage: see rating plate
– Frequency: see rating plate
– Rated power: see rating plate
– Charging current: see rating plate
– Permissible temperature range for use and
storage: + 5 °C to + 40 °C
The charging times are indicated at
www.stihl.com/charging-times.
20.6
If an extension cord is used, the cross sectional
area of its conductors must meet the following
minimum requirements – depending on the line
voltage and length of the extension cord:
If rated voltage on the rating label is 220V to
240V:
– Cord length up to 20 m: AWG 15 / 1.5 mm²
– Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
If rated voltage on the rating label is 100V to
127V:
– Cord length up to 10 m: AWG 14 / 2.0 mm²
– Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
20.7
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). K-
value for vibration level is 2 m/s².
MSA 120 C
STIHL recommends wearing ear defenders.
– Sound pressure level L
to EN 60745‑2‑13: 83 dB(A)
– Sound power level L
EN 60745-2-13: 94 dB(A)
– Vibration level a
EN 60745-2-13:
– Control handle: 3.2 m/s²
– Front handle: 3.4 m/s².
Remedy
► Remove the battery.
► Clean contacts on charger.
► Fit the battery.
► Do not use the charger and contact your
STIHL servicing dealer.
Charger STIHL AL 101
Extension Cords
Sound Values and Vibration
Values
pA
measured according to
wA
measured according to
hv
20 Specifications
measured according
0458-716-9621-D