Specifications - Stihl MSA 160 C Instruction Manual

English

21 Specifications

21.1 STIHL MSA 160 C, MSA 200 C
Chainsaws
MSA 160 C
– Approved batteries:
• STIHL AP
• STIHL AR
– Weight without battery, guide bar and saw
chain 2.7 kg
– Max. oil tank capacity: 210 cc (0.21 l)
MSA 200 C
– Approved batteries:
• STIHL AP
• STIHL AR
– Weight without battery, guide bar and saw
chain 2.9 kg
– Max. oil tank capacity: 210 cc (0.21 l)
For battery life see www.stihl.com/battery-life.
21.2 Chain Sprockets and Chain
Speeds
MSA 160 C
The following chain sprockets may be used:
– 6-tooth for 1/4" P
– Maximum chain speed: 16.1 m/s
MSA 200 C
The following chain sprockets may be used:
– 7-tooth for 1/4" P
– Maximum chain speed: 18.8 m/s
21.3 Minimum groove depth of guide
bars
The mininum groove depth depends on the pitch
of the guide bar.
– 1/4" P 4 mm
21.4 STIHL AP battery
– Battery technology: lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation
and storage: + 10 °C to + 50 °C
®
– Bluetooth radio interface (only for batteries
with ):
– Data connection: Bluetooth
mobile appliance must be compatible with
®
Bluetooth Low Energy 5.0 and support
Generic Access Profile (GAP).
56
®
5.1. The
– Frequency band: ISM band 2.4 GHz
– Maximum RF power transmitted: 1 mW
– Signal range: approx. 10 m. The signal
strength depends on the ambient conditions
and the mobile terminal. Signal range can
vary greatly depending on local conditions,
including the receiver. The range may be
perceptibly reduced inside enclosed rooms
and through metal barriers (such as walls,
shelves or cases).
– Mobile appliance operating system require‐
ments: Android or iOS (current version or
higher)
21.5 Noise and Vibration Data
K-value for sound pressure level is 2 dB(A). K-
value for sound power level is 2 dB(A). K-value
for vibration level is 2 m/s².
STIHL recommends that you wear hearing pro‐
tection.
MSA 160 C
– Sound pressure level L
to EN 60745‑2‑13: 84 dB(A)
– Sound power level L
EN 60745-2-13: 95 dB(A)
– Vibration level a measured according to
hv
EN 60745-2-13
• Control handle: 2.9 m/s²
• Front handle: 2.7 m/s²
MSA 200 C
– Sound pressure level L
to EN 60745‑2‑13: 84 dB(A)
– Sound power level L
EN 60745-2-13: 95 dB(A)
– Vibration level a measured according to
hv
EN 60745-2-13
• Control handle: 3.9 m/s²
• Front handle: 4.6 m/s²
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
21 Specifications
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
0458-701-9821-G