JDS Uniphase SKB Series User Manual page 80

RESET_CHANNEL
Define the reset output channel
Description
Reset_Channel, Switch
Parameters
Reset_Channel (unsigned eight-bit)--Output channel number to be associated with the
Parameter
reset channel
Description
Switch (unsigned eight-bit)-- switch number
Command packet
OPCODE Length
0x37 0x02
The reset channel is defined in reference to input port 1.This command will
Note:
cause the switch to be reset.
U8 Switch, U8 Reset_Channel
Switch (unsigned eight-bit)--Logical switch number (1-4)
Reset_Channel (unsigned eight-bit)--The output channel to be associated
with the reset position (0 to 200)
Parameters
Commands 65