Table of Contents
Advertisement
8
Introduction
Table 2: Optical Specifications
Change in insertion loss during power on-
off cycle; latching version
SM
MM
5
Repeatability
sequential switching
random switching
Crosstalk
Switching time (one channel/each addi-
tional channel)
low speed, high accuracy
medium speed
Optical input power
Lifetime
Interface
1.
All specifications referenced without connectors.
2.
All optical measurements taken after temperature has stabilized for one hour.
3.
All specifications are at low speed setting. Repeatability can be affected by increasing speed.
4.
Return loss specifications based on 1 m pigtail length.
5.
Repeatability measured after one-hour warm-up.
Table 3: Other Specifications
Electrical
Input voltage
Power consumption
Physical
Dimensions (W x H x D)
package 1 fiber version
package 1 cable version
package 2 fiber version
package 2 cable version
Weight
Environmental
Operating temperature
Storage temperature
Humidity
1,2,3
(Continued)
±1.0 (2.0) dB
±1.0 (2.0) dB
±0.005 (0.01) dB
±0.01 (0.05) dB
-90 dB
25/15 ms
20/15 ms
300 mW continuous
At least 10 million cycles
Parallel and RS485 serial
5 ±0.25 V DC
1 to 2.5 A maximum, configuration dependent
7.82 x 2.78 x 14.00 cm (3.08 x 1.095 x 5.51 in)
7.82 x 2.78 x 17.17 cm (3.08 x 1.095 x 6.76 in)
13.84 x 2.78 x 14.00 cm (5.45 x 1.095 x 5.51 in)
13.84 x 2.78 x 17.17 cm (5.45 x 1.095 x 6.76 in)
depends on configuration
0.6 kg maximum for package 1 configuration
1 kg maximum for package 2 configuration
-35 to 75 °C
-40 to 85 °C
maximum 95% RH, non-condensing, from -35 to 75 °C
±2.0 (4.0) dB
±2.0 (4.0) dB
±0.01 (0.03) dB
±0.03 (0.08) dB
-80 dB
Optical input power
Lifetime
Interface
Advertisement
Table of Contents
