Table of Contents
Advertisement
50
Commands
SWITCH
Modify switch state
Description
Switch, Input, Output
Parameters
Switch (unsigned eight-bit)--switch number
Parameter
Input (unsigned eight bit)--input channel
Description
Output (unsigned eight bit)--output channel
Command packet
OPCODE
Length
0x20
0x03
U8 Switch, U8 Input, U8 Output
Switch (unsigned eight-bit)--Logical switch number upon which to perform
action (for example, 1 to 4)
Input (unsigned eight-bit)--Input channel to connect (for example, 1 on a 1xN
switch)
Output (unsigned eight-bit)--Output channel to connect specified input chan-
nel, where
0 = reset position (factory configured to be a null connect, but this can have
been changed by user)
1 to 200 = output channel number
254 = previous channel; ignored if the switch is on the first channel
255 = next channel; ignored if the switch is on the last channel
Parameters
Advertisement
Table of Contents
