40
Commands
RESET
Reset all switches to the default state.
Description
This command is functionally the same as a hardware Reset. The following major events
occur:
Current settings (channel positions are saved)
A hardware reset is generated by the microcontroller
On wakeup, non-latching switches move to the Reset position (factory default is a null-
connect channel, but this can have been changed by the user), and latching switches
stay on the same channel
Also see the SWITCH command, which can be used to send individual switches to the
reset position.
NA
Parameters
NA
Parameter
Description
OPCODE
Length
0x00
0x00
Parameters