Table of Contents
Advertisement
⑧ Exit button
Press to return to previous screen
⑨ Enter button
Press to enter a menu screen or to confirm a setting
⑩ IR Sync Window
Use to send group and channel settings between the bodypack and transmitter
⑪ Scan Button
Press to perform an RF scan
⑫ Battery Compartment
Uses a Shure SB900A rechargeable battery or two AA batteries
⑬ Removable AA Adapter
Remove to use with a Shure SB900A rechargeable battery
Note: To remove, open the door and slide the adapter out. To reinstall, press the adapter into place—there is an audible click when seated.
Audio Settings
MODE
EQ
VLIMIT (Maximum Volume)
BAL MX / BAL ST (Balance)
STEREO: Audio from channel 1 is heard on the left earphone; audio from channel 2 is on the
right earphone.MIXMODE: Both channels are heard on the left and right earphones. The
blend between mixes is adjustable.
Use the two-band shelving equalizer to boost either bass or treble frequencies up to +6dB in
2 dB increments.
LOW BOOST: Boosts frequencies below 100 Hz
HIGH BOOST: Boosts frequencies above 10 kHz
OFF: No EQ (flat)
Set a value (-3 to -21 dB, adjustable in 3 dB increments) to attenuate the highest possible
volume level. Turning the volume knob through its entire range of motion still affects volume;
the limit simply narrows the range of dB adjustment.
Note: The VLIMIT does not compress the audio.
The behavior of the balance control depends on which mode the bodypack is set to:
STEREO: Adjusts the left/right balance
MIXMODE: Adjusts the blend between channel 1 and channel 2
Shure Incorporated
7/16
Advertisement
Table of Contents
