Headphone Settings; Firmware; Firmware Versioning - Shure ADX5D Manual

Headphone Settings

Choose a mode for your 3.5 mm. output depending on which equipment you use with the receiver.
3.5mm Output Settings
Tip
audio+
Balanced Sum (Rx1-12dB &
Rx2-12dB)
audio+
Balanced Rx2
(Rx2-6dB)
Balanced audio+
Rx1* (Rx1-6dB)
audio+
Sum Rx1 +
(Rx1-6dB and
Rx2
Rx2-6dB)
Solo Rx2 audio+ (Rx2)
Solo Rx1 audio+ (Rx1)
Stereo Rx1/
audio+ (Rx1)
Rx2* (default)
*When ADX5D is operating in FD-S with Pre selection chosen, the sum will continue to output the Post FD-S audio.

Firmware

Firmware is embedded software in each component that controls functionality. Installing the latest version of firmware updates
the receiver to incorporate additional features and enhancements. New versions of the firmware can be uploaded and installed
using the Shure Update Utility tool available in Shure Wireless Workbench 6 (WWB6) software. Software is available for down­
load from http://www.shure.com.

Firmware Versioning

When you update receiver firmware, update your transmitters to the same firmware version to ensure consistent operation.
The firmware of all devices has the form of MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on the network (in­
cluding transmitters), must have the same MAJOR and MINOR firmware version numbers (e.g., 1.2.x).
Ring Sleeve
audio-
(Rx1-12dB & Ground
Rx2-12dB)
audio-
Ground
(Rx2-6dB)
audio-
Ground
(Rx1-6dB)
audio+
(Rx1-6dB and Ground
Rx2-6dB)
audio+ (Rx2) Ground
audio+ (Rx1) Ground
audio+ (Rx2) Ground
Balanced/Un­
Max Out
balanced
Balanced ~ +8.5 dBV
Balanced ~ +8.5 dBV
Balanced ~ +8.5 dBV
+8.5 dBV per
Unbalanced
channel
+8.5 dBV per
Unbalanced
channel
+8.5 dBV per
Unbalanced
channel
+8.5 dBV per
Unbalanced
channel
Shure Incorporated
Stereo Sepa­
ration
N/A
N/A
N/A
N/A
N/A
N/A
60 dB (TO BE
CONFIRMED)
26/33