Lucent Technologies SLC-2000 Access System Central Office Terminal Assembly Manual page 80

363-208-011
Cabling, Wiring, and Assembly
Shelf Dangler Cable Assembly [ED7C723-32 Group 11()] which has been
furnished as part of the MDS assembly.
NOTE
Verify that unassigned connectors (for unfurnished MDS assemblies) have
their protective caps installed.
Connections
Step 1: Mate the ARM Shelf PCM dangler Cable Assembly connector J500 () in
the left duct with its MDS shelf P500 counterpart in accordance with the
following assignment:
Step 2: Position the cables in the left side duct in accordance with Figure 3-16.
3-22
Issue 4 February 1997
:
ARM Shelf Connector
J500-1
J500-2
J500-3
J500-4
MDS
1
2
3
4