Lucent Technologies SLC-2000 Access System Central Office Terminal Assembly Manual page 48

363-208-011
Installation Procedures
Cable
Assembly
PIU
Figure 2-6. PIU Mounting Details
J1C265AD-1 ARM Shelf Mounting Procedure
Step 1: Mount the shelf and its associated baffle panel, using their attached
hardware, to their designated bay positions.
Step 2: Locate the ground strap attached to the ARM shelf and connect it to the
bay frame as indicated in Figure 2-5.
Step 3: Locate the ground strap attached to the UIP ESD jack and connect it to
the bay frame as indicated in Figure 2-5.
Step 4: Move the attached shelf cable assemblies forward so that they drape
into the bay frame's cable duct areas. Leave the connectors in place at
this time for future connection to the Intrabay and Customer Interface
cable assemblies.
2-16
Issue 4 February 1997
J183
J167
DS1 IN 17-28
DS1 DISTRIBUTION
DS1 OUT 17-28
J165
J163
DS1 OUT 17-28
CONNECTOR LABELS
SEE FIGURE LABELS
J179
J184 J161
DS1 IN 17-28 DS1 IN 1-16
ARM Shelf (Rear View)
:
NOTE
Remove any paint as necessary on the bay frame to ensure a
low-resistance contact.
J174
J177
J182
J175
J168
DS1 IN 1-16
DS1 OUT 1-16
J166
J162
DS1 OUT 1-16
J43 J42 J39
SEE CONNECTOR
FIGURE
J160 J45 J50
J172
J173
J176
E 1
-48V B
E 2
-48V A
E 3
-48V RTN B
E 4
-48V RTN A
J38
J53