Related Manuals for Zenitel ITSV-2
Summary of Contents for Zenitel ITSV-2
- Page 1 Quick Installation & Configuration Guide ITSV-2 IP Touch Station with Video Technical Manual 1490002010 ...
- Page 2 You hereby waive any and all such claims or causes of action arising from or relating to your inability to use the ITSV-2 to contact emergency services, and your failure to make additional arrangements to access emergency services in accordance with the immediately preceding paragraph.
-
Page 3: Package Contents
Precautions Please DO NOT power cycle the ITSV-2 during system boot-up Warning: or firmware upgrade. You may corrupt firmware images and cause the unit to malfunction. Use only the power adapter included in the ITSV-2 package. Warning: Using an alternative non-qualified power adapter may possibly damage the unit. - Page 4 The ITSV-2 features a 5-inch 1080x720 capacitive touch screen, tiltable camera, HDMI output, dual microphones, support for 720p HD video, and runs Android 7.0. The ITSV-2 delivers HD audio & video, leading edge SIP intercom features and integration with IC-EDGE and ICX-AlphaCom IP Intercom Platforms developed by Zenitel.
- Page 5 Tab with Extension Down Connecting the ITSV-2 1. Connect the handset and main unit case with the phone cord. 2. Connect the LAN Port of the unit to the RJ45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable.
- Page 6 Speaker Standard Keypad ● VOLUME: Press the UP or DOWN keys to adjust the volume on the ITSV-2. ● HOME: Press the HOME key to return to the default idle screen. Press and hold the HOME key for 2 seconds to take a screenshot.
- Page 7 Configuring the ITSV-2 Using Web Browser 1. Ensure your ITSV-2 is properly powered up and connected to the Internet. 2. To find the IP address of the ITSV-2, use the touch screen and tap Settings > Status > Network status > IPv4 address 3.
- Page 8 The following sections describes how the ITSV-2 is configured to work together with the TCIV+ Video Intercoms TCIV-2+/TCIV-3+/TCIV-5+/TCIV-6+. ICX-AlphaCom Configuration ● Log into the ITSV-2 by entering default username / password: admin / alphaadmin ICX-AlphaCom ITSV-2 Account Setup ● Select Account > Account 1 > General Settings ●...
- Page 9 ICX-AlphaCom ITSV-2 Video Configuration The video is streamed in H.264 format over RTSP protocol from the TCIV+ camera to the ITSV-2. The TCIV+ camera must have a static IP address. ● Select Account 1 > Call Settings ● Check the box for Start Video Automatically ●...
- Page 10 Vingtor-Stentofon Device from the dropdown list For further information on the configuration of IC-EDGE, please see Zenitel Wiki ● Log into the ITSV-2 by entering default username / password: admin / alphaadmin IC-EDGE ITSV-2 Account Setup ● Select Account > Account 2 > General Settings ●...
-
Page 11: Contact Customer Service
April 2021 Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice.