NB! Please DO NOT power cycle the ITSV-5 during system boot up Used for USB Device mode. Connect the ITSV-5 to a USB Host Type-C Port device, such as a PC, the ITSV-5 will act as its USB external audio or firmware upgrade. You may corrupt firmware images and cause device.
Phone Setup Front View Mounting the Phone ITSV-5 Attach the Wall Mount Bracket for ITSV-5 (item no. 1490009007) to the slots for wall mount spacers on the back of the phone. Attach the phone to the wall via the wall mount holes.
Connecting the Phone Using the Phone Stand The ITSV-5 has a built-in phone stand. To use it, pull out the phone stand Connect the handset and main phone case with the phone cord. handle on the back of the phone. Adjust the angle as preferred and make sure the phone stands still on the desktop.
ITSV-5). The WEEE Directive does not legislate that Zenitel, as a ‘producer’, shall collect ‘end of life’ WEEE. This ‘end of life’ WEEE should be recycled appropriately by the owner who should use proper In the web GUI ->...
Page 6
A100K12168 Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. Zenitel, Vingtor-Stentofon and Phontech products are developed and marketed by Zenitel. The company’ s Quality Assurance System is certified to meet the requirements in NS-EN ISO 9001.