Download Print this page

Technical Specifications - Bogen S810T725PG8W Features

Cone loudspeakers,wall baffle, ceiling grilles, and assemblies

Advertisement

WB8
CG8A
,
(shown)
CG8AW
PG8A
PG8W
SG8W
MR8
RE84
TB8
AT10A

Technical Specifications

Speaker Accommodated
Constructed of
Finish
Diameter/Dimensions
Shipping Weight
* Features hidden speaker mounting studs • **With black grille cloth • † 9-1/2"W x 9-1/2"H x 5-1/4"D (3-1/4" D at bottom)
Wall Baffle, Grilles, Accessories
• Sturdily constructed
• Attractively styled and finished
• Wall baffle surface mounts at an angle for downward sound dispersion
WB8 Wall Baffle
The WB8 baffle is ruggedly constructed of 3/8" particle board, glued and covered in
simulated walnut vinyl with a black grille cloth. Side corner joints are reinforced with
glue blocks. It is handsomely styled and looks well in virtually any decor. The slop-
ing front provides extra downward sound dispersion.
Ceiling Grilles
Sturdily constructed and handsomely styled, these metal grilles protect and conceal
(shown),
recessed 8" ceiling speakers. They are shipped complete with the hardware needed
to mount speaker to grille. Models CG8A, CG8AW, PG8A, PG8W, and SG8W.
RE84 Ceiling Speaker Enclosure
The RE84 is a protective enclosure for an 8" speaker, designed for recessed instal-
lations, and for use with any of the Bogen ceiling grilles. One-piece steel construc-
tion includes a mounting ring and a foam insert to reduce metallic resonance. The
RE84 is finished in rust-resistant black primer and is tapered for easy stacking.
UL approved.
MR8 Mounting Ring
The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles,
for installations where the RE84 is not used.
TB8 Tile Bridge
The TB8 is a load bearing T-bar support designed to sustain the weight of an 8"
speaker, grille and protective enclosure in suspended ceiling construction. Use of the
TB8 improves environmental safety and eliminates unsightly sag in 2'-by-2' and 20'-
by-4' acoustic ceiling tiles.
Speaker Line Attenuators
The AT10A and AT35A are 10-watt and 35-watt attenuators that permit setting
the output level at loudspeakers on a 25V or 70V line without altering the amplifier
volume setting. They provide a choice of 10 stops and an "off" position.
Wall Baffle
Ceiling Grilles
WB8
CG8A
8" cone
8" cone
3/8" Particle
Aluminum
Board
(contoured)
Walnut Vinyl**
Satin
Aluminum
5
12-
See Below†
/
"
8
4 @ 10 lbs.
15 @ 8 lbs.
CG8AW
PG8W
8" cone
8" cone
Aluminum
Steel
(contoured)
Semi-gloss
Semi-Gloss
White Enamel
White Enamel
5
12-
13"
/
"
8
15 @ 9 lbs.
20 @ 27 lbs.
2
PG8A
SG8W*
8" cone
8" cone
Aluminum
Steel
Satin
Semi-Gloss
Aluminum
White Enamel
13"
13"
20 @ 10 lbs.
10 @ 13 lbs.

Advertisement

loading

This manual is also suitable for:

S86t725pg8wWbs810t725Wbs8t725Wbs8t725vAt10aS86 ... Show all