Download Print this page
Bogen S810T725PG8W Features

Bogen S810T725PG8W Features

Cone loudspeakers,wall baffle, ceiling grilles, and assemblies

Advertisement

Quick Links

Cone Loudspeakers,Wall Baffle,
Ceiling Grilles, and Assemblies
Speaker Model
Variations and
Accessories
• High quality, direct radiator speakers
Features
• 7 watts and 15 watts power handling capacity
• Provision for quick attachment of transformer
• Available with transformer mounted and wired
Cone Diameter:
Magnet Weight:
Magnet Material:
Specifications
Voice Coil Impedance:
Voice Coil Diameter:
Frequency Response:
Axial Sensitivity (at 4 feet with 1-watt input):
Power Handling Capacity (program material):
Depth:
Shipping Weight:
Optional Speaker/Transformer Combinations:
Accessories:
The Bogen Models S86 and S810 8" cone-type loud-
speakers provide excellent sound quality and trouble-
free operation. Their magnetic structure is designed
for maximum air gap energy and the diaphragms have
Description
been selected for high sensitivity and optimized
response characteristics. The speakers are easy to
install in ceiling grilles or wall baffles. Mounting holes
have been provided for quick attachment of a trans-
former.
Transformers include the Model T725, which matches
an 8-ohm speaker to a 25- or 70-volt line with six
power taps for either voltage (4, 2, 1, 1/2, 1/4, and 1/8
watt), and the Model T72510 which matches an 8-
ohm speaker to a 25- or 70-volt line with five power
taps for either voltage (10, 5, 2-1/2, 1-1/4, 5/8 watts).
S86T725, S810T725 – S86, S810 speaker with 25/70V transformer (Model T725)
S86T725BR – S86 speaker with 25/70V transformer and terminal strip (-BR)
T725 Transformer – 25V or 70V; Power Taps (watts): 4, 2, 1, 1/2, 1/4, 1/8;Voice Coil: 8 ohms
T72510 Transformer – 25V or 70V; Power Taps (watts): 10, 5, 2-1/2, 1-1/4, 5/8;Voice Coil: 8 ohms
Attenuators – AT10A, AT35A: 10-watt and 35-watt, respectively
S86
S86
8"
6 oz.
Ceramic
8 ohms
3/4"
50Hz to 12kHz
95dB
7 watts
3-1/4"
16 @ 25 lbs.
The S86 and S810 are available in factory assembled
versions, with the Model T725 transformer already
mounted. The S86 assembly is also available with a
terminal strip (-BR), and volume control (-V).
Bogen also offers the speakers, fully assembled with a
transformer, in an attractively finished wall baffle
(Model WB8), or in ceiling grilles for recessed instal-
lation. Assemblies are also available with optional vol-
ume control and/or terminal strip.
Specifications subject to change without notice.
©2001 Bogen Communications, Inc.
Part No. 54-7777-06R2 Printed in U.S.A. 0106
S810
S810
8"
10 oz.
Ceramic
8 ohms
1"
70Hz to 15kHz
96dB
15 watts
3-1/4"
16 @ 34 lbs.

Advertisement

loading

Summary of Contents for Bogen S810T725PG8W

  • Page 1 T72510 Transformer – 25V or 70V; Power Taps (watts): 10, 5, 2-1/2, 1-1/4, 5/8;Voice Coil: 8 ohms Attenuators – AT10A, AT35A: 10-watt and 35-watt, respectively The Bogen Models S86 and S810 8" cone-type loud- speakers provide excellent sound quality and trouble- free operation.
  • Page 2: Technical Specifications

    RE84 is finished in rust-resistant black primer and is tapered for easy stacking. UL approved. MR8 Mounting Ring The MR8 is a cold-rolled steel unit which will mount any of the Bogen ceiling grilles, for installations where the RE84 is not used. TB8 Tile Bridge The TB8 is a load bearing T-bar support designed to sustain the weight of an 8"...
  • Page 3 S86T725PG8WBRVR S86T725PG8WBR with recessed volume control S86T725PG8WBRVK S86T725PG8WBR with knob volume control S810T725PG8W Assemblies with Transformer & Ceiling Grille The S810 loudspeaker with model T725 transformer is available mounted to a PG8W ceiling grille. The list below shows all the available configurations:...
  • Page 4: Architects And Engineers Specifications

    Architects and Engineers Specifications S86 Cone Loudspeaker The loudspeaker shall be a Bogen model S86 (or trans- former coupled S86T725 or S86T725BR), or equivalent, 8" cone-type loudspeaker, having a frequency response of at least 50Hz to 12kHz. Axial sensitivity shall be 95dB, at four feet with one-watt input.
  • Page 5 A control shall also be included for adjusting the volume of the loudspeaker. WBS810T725 The surface mounting loudspeaker shall be a Bogen model WBS810T725, or equivalent, 8" cone-type loudspeaker having a frequency response of at least 70Hz to 15kHz. Axial sensitivity shall be 96dB, at four feet with one-watt input.
  • Page 6 The dimensions shall be: 12-1/4" dia. x 4-1/2"D. MR8 - Mounting Ring The plaster ring shall be a Bogen model MR8, or equivalent, circular cold-rolled steel unit. It shall be finished in a rust- retardant gray primer coating, and the dimensions shall be: 12"...

This manual is also suitable for:

S86t725pg8wWbs810t725Wbs8t725Wbs8t725vAt10aS86 ... Show all