Outside Mirrors; Driver's Outside Automatic Dimming Mirror; If Equipped; Outside Mirrors With Turn Signal And - Chrysler 300 2022 Owner's Manual

Table of Contents

Advertisement

38
GETTING TO KNOW YOUR VEHICLE
O
M
UTSIDE
IRRORS
The outside mirror(s) can be adjusted to the center
of the adjacent lane of traffic to achieve the
optimal view.
WARNING!
Vehicles and other objects seen in an outside
convex mirror will look smaller and farther away
than they really are. Relying too much on side
convex mirrors could cause you to collide with
another vehicle or other object. Use your inside
mirror when judging the size or distance of a
vehicle seen in a side convex mirror.
D
'
O
A
RIVER
S
UTSIDE
UTOMATIC
D
M
— I
E
IMMING
IRROR
F
QUIPPED
The driver's outside mirror will automatically adjust
for glare from vehicles behind you. This feature is
controlled by the inside automatic dimming mirror
and will automatically adjust for headlight glare
when the inside mirror adjusts.
O
M
W
T
UTSIDE
IRRORS
ITH
A
A
L
ND
PPROACH
IGHTING
I
E
F
QUIPPED
Driver and passenger outside mirrors with turn
signal and approach lighting contain four LEDs,
which are located in the upper outer corner of each
mirror.
Three of the LEDs are turn signal indicators, which
flash with the corresponding turn signal lights in
the front and rear of the vehicle. Turning on the
Hazard Warning flashers will also activate these
LEDs.
The fourth LED supplies illuminated entry lighting,
which turns on in both mirrors when you use the
key fob or open any door. This LED shines outward
to illuminate the front and rear door handles. It
also shines downward to illuminate the area in
front of the doors.
The illuminated entry lighting fades to off after
about 30 seconds or it will fade to off immediately
once the ignition is placed into the ON/RUN
position.
NOTE:
The approach lighting will not function when the
gear selector is moved out of the PARK position.
S
P
M
URN
IGNAL
OWER
The power mirror controls are located on the
driver's door trim panel.
The power mirror controls consist of mirror select
buttons and a four-way mirror control switch. To
adjust a mirror, push the mirror select button for
the mirror that you want to adjust. Using the mirror
control switch, push on any of the four arrows for
the direction that you want the mirror to move.
1 — Left Mirror Selection
2 — Mirror Direction Control
3 — Right Mirror Selection
Power mirror positions can be saved with a Driver
Memory Settings profile Ú page 28.
IRRORS
Power Mirror Controls

Advertisement

Table of Contents
loading

Table of Contents