Table of Contents
Advertisement
Outputs: Digital Setup Menu (Channel 1 and 2)
OUTPUT
PULSES PER METER
MAX SPEED
MAX VALUE
MAX FREQUENCY
https://racelogic.support//01VBOX_data_loggers/VBOX_II_Range/VBOX_II_User_Guide/01_-_VBOX_II_Front_Panel
Press '■' and then use the '◄' and '►' buttons to
associate either of the following channels SPEED, SLIP,
PITCH, ROLL, LAT ACC and LONG ACC to the Digital
output. Then press '■' to confirm.
Only available when output is set to SPEED.
Press '■' and then use the '◄' and '►' buttons to set the
number of pulses per revolution. Then press '■' to
confirm.
0.1 – 120 (0.1 Steps)
Only available when output is set to SPEED.
Press ■' and then use the '◄' and '►' buttons to set the
maximum Speed. Then press '■' to confirm.
0 – 400 km/h (1 km/h steps)
Only available when output is set to LAT ACC, LONG
ACC, PITCH, SLIP or ROLL
Press '■' and then use the '◄' and '►' buttons to set the
maximum value of that channel. Then press '■' to
confirm.
o
o
0 – 180
(1
steps) for Slip
o
o
0 – 90
(1
steps) for Pitch
o
o
0 – 90
(1
steps) for Roll
0.5 – 2 g (0.1 g steps) for LAT ACC
0.5 – 2 g (0.1 g steps) for LONG ACC
Only available when output is set to LAT ACC, LONG
ACC, PITCH, SLIP or ROLL
Press '■' and then use the '◄' and '►' buttons to set the
maximum Frequency used on the digital output. Then
press '■' to confirm.
8
Advertisement
Table of Contents
