Table of Contents
Advertisement
Outputs: Analogue Setup Menu (Channel 1 and 2)
OUTPUT
VALUE @ +5V
VALUE @ 0V
VALUE @ -5V
https://racelogic.support//01VBOX_data_loggers/VBOX_II_Range/VBOX_II_User_Guide/01_-_VBOX_II_Front_Panel
Press '■' and then use the '◄' and '►' buttons to
associate either of the following channels SPEED, SLIP
or PITCH, ROLL, LAT ACC and LONG ACC to the
Analogue output. Then press '■' to confirm.
Press '■' and then use the '◄' and '►' buttons to set the
value to represent +5 V. Then press '■' to confirm.
1 – 400 km/h (1 km/h steps)
o
o
o
–179
to 180
(0.1
steps) for Slip
o
o
o
-89
to 90
(1
steps) for Pitch
o
o
o
-89
to 90
(1
steps) for Roll
-1 to 2 g (0.1g steps) LAT ACC
-1 to 2 g (0.1g steps) LONG ACC
Only available when output is set to SPEED.
Press '■' and then use the '◄' and '►' buttons to set the
velocity to represent 0 V. Then press '■' to confirm.
0-399 km/h (1 km/h steps)
Only available when output is set to LAT ACC, LONG
ACC, PITCH, SLIP or ROLL.
Press '■' and then use the '◄' and '►' buttons to set the
value to represent -5 V. Then press '■' to confirm.
-2 to 1 g (0.1g steps) LAT ACC
-2 to 1 g (0.1g steps) LONG ACC
o
o
o
–180
to 179
(0.1
steps) for SLIP
o
o
o
-90
to 89
(1
steps) for PITCH
o
o
o
-90
to 89
(1
steps) for ROLL
10
Advertisement
Table of Contents
