Monogram ZTS90DS Owner's Manual page 6

30 single direct air convection built-in electric wall oven, 30 double direct air convection built-in electric wall oven
Hide thumbs Also See for ZTS90DS:
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
The remote enable equipment installed on this oven has
been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to:
(a) provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
HOW TO REMOVE PROTECTIVE SHIPPING FILM AND PACKAGING TAPE
Carefully grasp a corner of the protective shipping film with
your fingers and slowly peel it from the appliance surface.
Do not use any sharp items to remove the film. Remove all
of the film before using the appliance for the first time.
READ AND SAVE THESE INSTRUCTIONS
6
■ R eorient or relocate the receiving antenna.
■ I ncrease the separation between the equipment and
receiver.
■ C onnect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
■ C onsult the dealer or an experienced radio/TV technician
for help.
(b) accept any interference received, including interference
that may cause undesired operation of the device.
Note that any changes or modifications to the wireless
communication device installed on this oven that are not
expressly approved by the manufacturer could void the
user's authority to operate the equipment.
To assure no damage is done to the finish of the product,
the safest way to remove the adhesive from packaging
tape on new appliances is an application of a household
liquid dishwashing detergent. Apply with a soft cloth and
allow to soak.
NOTE: The adhesive must be removed from all parts. It
cannot be removed if it is baked on.
49-2000385 Rev. 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ztd90dsZts90dpZtd90dp

Table of Contents