Repair Information - Johnson Controls TL-MAP1810-OP Installation Manual

2. The Fault LED indicator flashes for approximately 40 seconds, then turns off when the MAP
Gateway is fully functional.
3. The Wi-Fi LEDs light up in succession (scanning), indicating that the MAP Gateway is waiting
for a device to join its Wi-Fi network.

Repair Information

If the MAP Gateway fails to operate within its specifications, replace it. The MAP Gateway is not a
serviceable product; however, it does support software updates to enable feature enhancements.
For a replacement unit, software updates, or accessories, contact the nearest Johnson Controls
representative.
Do not open the MAP Gateway housing. The MAP Gateway has no user-serviceable parts inside.
The MAP Gateway does not require periodic field maintenance.
Mobile Access Portal Gateway Installation Guide 25