Warnings - Graco Husky 3300e Manual

Warnings

Warnings Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The
exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific
risks. When these symbols appear in the body of this manual or on warning labels, refer back to these
Warnings. Product-specific hazard symbols and warnings not covered in this section may appear throughout
the body of this manual where applicable.
SEVERE ELECTRIC
SEVERE SEVERE
This equipment can be powered by more than 240 V. Contact with this voltage will
cause death or serious injury.
• Turn off and disconnect power at main switch before disconnecting any cables and
before servicing equipment.
• This equipment must be grounded. Connect only to grounded power source.
• All electrical wiring must be done by a qualified electrician and comply with all local
codes and regulations.
FIRE AND AND EXPLOSION
FIRE FIRE AND
Flammable fumes, such as solvent and paint fumes, in work
or solvent flowing through the equipment can cause static sparking. To help prevent fire and
explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and
plastic drop cloths (potential static arc).
• Ground all equipment in the work area. See Grounding
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when flammable
fumes are present.
• Use only grounded hoses.
Stop operation operation immediately
• Stop Stop operation
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
Static charge may build up on plastic parts during cleaning and could discharge and ignite
flammable vapors. To help prevent fire and explosion:
• Clean plastic parts only in well ventilated area.
• Do not clean with a dry cloth.
• Do not operate electrostatic guns in equipment work area.
3A7037G
DANGER
ELECTRIC SHOCK SHOCK HAZARD
ELECTRIC SHOCK
WARNING
EXPLOSION HAZARD HAZARD
EXPLOSION HAZARD
immediately if static sparking occurs or you feel a shock. . . Do not use
immediately
HAZARD
HAZARD
work area work
Grounding instructions. Grounding
area can ignite or explode. Paint area
Warnings
3