Table of Contents
Advertisement
Chapter 1
Ecology features
Toner Save
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a
Press Menu, 1, 4, 1.
b
Press a or b to choose On or Off.
Press OK.
c
Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Greyscale images.
2
Sleep Time
1
The Sleep mode setting can reduce power
consumption. When the machine is in Sleep
1
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
You can choose how long the machine must
be idle before it goes into Sleep mode. When
the machine receives a fax or a print job, the
timer will be reset. The default setting is 3
minutes.
While the machine is in Sleep mode the LCD
will show Sleep.
a
Press Menu, 1, 4, 2.
b
Enter the length of time (0-90 minutes)
the machine is idle before entering
Sleep mode.
Press OK.
c
Press Stop/Exit.
Deep Sleep mode
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically and the LCD will show
Deep Sleep. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a fax or a print job.
1
1
Advertisement
Table of Contents
