Promax EN-206 LITE Manual page 18

(4) Stream (Transport Stream settings):
TSID (Transport Stream ID):
User can check or change this value from this menu.
ONID (Original Network ID):
User can view or adjust this value from this menu.
Network ID (NIT) (Network Information Table)
NIT table is a very important table for describing the network and TS. User
can enter the submenus displayed and edit the values. If user chooses to
insert the NIT, information (Network ID, Network Name, LCN Mode,
Private Data , etc.) will be added to the Transport Stream.
NOTE: When the Private Data is set as 0*0, it is cancelled.
(5) Modulator:
Country:
It allows the user to select a country or continent to automatically set
parameters. There are 4 options: Europe, New Zealand, Russia or Default.
If the user selects Default, modulation parameters must be set manually
by means of Advanced Configuration. For any other option, parameters
are automatically adjusted (RF frequency, bandwidth, constellation, FEC,
FFT, guard interval and RF level) according to the country and selected
channel.
Channel:
It allows user to select a channel.
Bitrate:
It shows the current bitrate for the selected modulation and maximum
bitrate.
Code rate:
It refers to FEC-(Forward Error Correction) rate. Select between 1/2, 2/3,
3/4, 5/6 and 7/8.
NOTE: Different combination of bandwidth, constellation, guard interval
RF Frequency:
Adjust it at range of 30 to 999 MHz. Set it according your location or ask
your local distributor.
June 2021
and code rate (FEC) release a different output code rate. Please
refer to appendix.
11