Promax EN-206 LITE Manual page 19

Bandwidth:
Select between 6M, 7M and 8M.
Constellation:
DVB-T modulator contains these constellation modes: 64 QAM, QPSK and
16 QAM.
FEC:
Forward Error Correction rate. Available values are 1/2, 2/3, 3/4, 5/6 y
7/8.
FFT:
Select between 2K and 8K.
Guard Interval:
Select between 1/32, 1/16, 1/8 and 1/4.
RF Level (RF Level):
Adjust the signal level between -14~ +6dBm.
NOTE: Different settings for bandwidth, constellation, guard interval and FEC
will give a different code rate. Refer to appendix. To ensure a good
quality image, code rate must be bigger than 22 MHz.
(6) System:
Save Config?:
Yes / No. Saving settings.
Load Saved CFG?:
Yes / No. Loading saved settings.
Reset all sets?:
Yes / No. Loading default settings from factory.
LCD Time-out:
A time limit that LCD will light off. Choose among 5, 10, 45, 60, 90 and
120 (seconds).
Set password:
User can set a 6 digital password used to unlock the keyboard.
12
June 2021