Checking The Print Alignment; Checking The Ink Volume - Brother DCP-395CN User Manual

Checking the print alignment

You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a
Press Ink Management.
b
Press a or b to choose Test Print.
Press OK.
c
Press a or b to choose Alignment.
Press OK.
d
Press Mono Start or Colour Start.
The machine starts printing the
Alignment Check Sheet.
e
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press + (Yes) to
finish Alignment Check, and go to
step h.
If another test print number is a
better match for either 600 dpi or
1200 dpi, press - (No) to choose it.
f
For 600 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
g
For 1200 dpi, press d or c to choose the
number of the test print that most closely
matches the number 0 sample (1-8).
Press OK.
h
Press Stop/Exit.
Troubleshooting and Routine Maintenance

Checking the ink volume

B
You can check the ink that is left in the
cartridge.
a
Press Ink Management.
b
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
c
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
Printing and Faxing for Macintosh in the
Software User's Guide on the CD-ROM.)
B
®
or
B
89