Removing Small Printouts From The Machine - Brother DCP-395CN User Manual

Chapter 2
c
Put the photo paper into the photo paper
tray and gently adjust the paper side
guides to the paper.
Make sure the paper side guides touch
the sides of the paper. Check that the
paper is flat in the tray.
Note
• Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
• Always make sure that the paper is not
curled.
d
When you have finished printing photos
return the photo paper tray to the normal
printing position.
Squeeze the blue photo paper tray
release button (1) using your right index
finger and thumb and pull the photo
paper tray back until it clicks (2).
1
14
Removing small printouts
from the machine
When the machine ejects small paper onto
the output paper tray cover you may not be
able to reach it. Make sure printing has
finished, and then pull the tray completely out
of the machine.
2
2