Error And Maintenance Messages - Brother DCP-395CN User Manual

Digital copier printer
Hide thumbs Also See for DCP-395CN:
Table of Contents

Advertisement

Error and Maintenance messages

As with any sophisticated office product, errors may occur and consumable items may need to be
replaced. If this happens, your machine identifies the error and shows an error message. The
most common error and maintenance messages are shown below.
You can correct most errors and routine maintenance by yourself. If you need more help, the
Brother Solutions Center offers the latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
Error Message
B&W Print Only
Cannot Detect
Cause
One or more of the colour ink
cartridges have reached the end
of their life.
You can use the machine in
black & white mode for
approximately four weeks
depending on the number of
pages you print.
While this message appears on
the LCD, each operation works in
the following way:
Printing
If you click Greyscale in the
Advanced tab of the printer
driver you can use the
machine as a monochrome
printer.
Copying
If the paper type is set to
Plain Paper or
Inkjet Paper you can
make copies in monochrome.
If the paper type is set to
Other Glossy or
Brother BP71, the machine
will stop all print operations. If
you unplug the machine, or take
out the ink cartridge, you cannot
use the machine until you
change to a new ink cartridge.
You installed a new ink cartridge
too quickly and the machine did
not detect it.
If you are using non Brother
Original ink the machine may not
detect the ink cartridge.
Troubleshooting and Routine Maintenance
Action
Replace the ink cartridges. (See Replacing
the ink cartridges on page 82.)
Take out the new ink cartridge and
re-install it slowly.
Replace the cartridge with a Brother
Original ink cartridge. If the error message
remains, contact your Brother dealer.
B
B
77

Advertisement

Table of Contents
loading

Table of Contents