Brother DCP-395CN User Manual page 50

Chapter 5
e
Press OK. Then press + or - repeatedly
to enter the number of copies you want.
f
Do one of the following:
Press OK and change the print
settings. (See page 47.)
If you do not want to change any
settings, press Colour Start to print.
Enhance Skin-Tone
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
colour in your photos and adjusts the image.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Skin-Tone.
Press OK.
e
Do one of the following:
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually. Press OK when you have
finished.
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following:
Press OK and change the print
settings. (See page 47.)
If you do not want to change any
settings, press Colour Start to print.
42
Enhance Scenery
Enhance Scenery is best used for adjusting
landscape photographs. It highlights green
and blue areas in your photo, so that the
landscape looks more sharp and vivid.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press
5
b
Press a or b to choose
Enhance Photos.
Press OK.
c
Press d or c to choose your photo.
Press OK.
d
Press a or b to choose
Enhance Scenery.
Press OK.
e
Do one of the following:
Press OK if you do not want to
change any settings.
Press a or b to adjust the effect level
manually. Press OK when you have
finished.
f
Press + or - repeatedly to enter the
number of copies you want.
g
Do one of the following:
Press OK and change the print
settings. (See page 47.)
If you do not want to change any
settings, press Colour Start to print.
(Photo Capture).
5