Enlarging Or Reducing The Image Copied - Brother DCP-395CN User Manual

Chapter 4
Enlarging or reducing the
image copied
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose
Enlarge/Reduce.
d
Press d or c to choose 100%, Enlarge,
Reduce, Fit to Page,
Custom(25-400%).
e
Do one of the following:
If you choose Enlarge or Reduce
press OK and press d or c to choose
the enlargement or reduction ratio
you want. Press OK and go to
step f.
If you choose Custom(25-400%),
press OK. Press + or - to enter an
enlargement or reduction ratio from
25% to 400%. Press OK and go to
step f.
If you choose 100% or
Fit to Page, press OK. Go to
step f.
198% 10x15cmiA4
186% 10x15cmiLTR
142% A5iA4
100%
97% LTRiA4
93% A4iLTR
83%
69% A4iA5
47% A4i10x15cm
Fit to Page
Custom(25-400%)
28
f
If you do not want to change additional
settings, press Mono Start or
Colour Start.
4
Note
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Book Copy and
Watermark Copy are not available with
Fit to Page.
• Fit to Page does not work properly if
the document on the scanner glass is
skewed by more than 3 degrees. Using
the document guidelines on the left and
top, place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available for a Legal
size document.