Printing Photos; Enhance Photos - Brother DCP-395CN User Manual

Printing Photos

Before you can print an individual image, you
have to know the image number.
a
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
b
Print the Index. (See Print Index
(Thumbnails) on page 40.)
c
Press a or b to choose Print Photos.
Press OK.
d
Press a repeatedly to choose the image
number that you want to print from the
Index page (Thumbnails).
If you want to choose a two digit
number, press c to move the cursor to
the next digit.
(For example, enter 1, c, 6 to print image
No.16.)
Press OK.
Note
Press b to decrease the image number.
e
Repeat step d until you have entered
all the image numbers that you want to
print.
(For example, enter 1, OK, 3, OK, 6, OK
to print images No.1, No.3 and No.6.)
Note
You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f
After you have chosen all the image
numbers, press OK again.
g
Press + or - repeatedly to enter the
number of copies you want.
Printing photos from a memory card or USB Flash memory drive
h
5

Enhance Photos

You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing
Ink Management. To go back to the
original size, press Ink Management
again.
• The Enhance Photos feature is supported
by technology from Reallusion, Inc.
Auto Correct
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a
b
c
d
Note
If Remove Red-Eye appears on the LCD,
press a to attempt to remove red-eye from
your photo.
Do one of the following:
Change the print settings. (See
page 47.)
If you do not want to change any
settings, press Colour Start to print.
Make sure you have put the memory
card or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
Press a or b to choose
Enhance Photos.
Press OK.
Press d or c to choose your photo.
Press OK.
Press a or b to choose Auto Correct.
Press OK.
5
5
5
41