Enlarging Or Reducing The Copied Image - Brother MFC-J6910DW Advanced User's Manual

Chapter 7
Enlarging or reducing the
copied image
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display
Enlarge/Reduce.
e
Press Enlarge/Reduce.
f
Press 100%, Enlarge, Reduce,
Fit to Page or Custom(25-400%).
g
Do one of the following:
 If you chose Enlarge or Reduce,
press the enlargement or reduction
ratio you want.
 If you chose Custom(25-400%),
enter an enlargement or reduction
ratio from 25% to 400%.
Press OK.
 If you chose 100% or Fit to Page,
go to step h.
42
198% 4"x6"iA4
7
186% 4"x6"iLTR
130% LTRiLGR
104% EXEiLTR
100%
97% LTRiA4
93% A4iLTR
85% LTRiEXE
83% LGLiA4
78% LGLiLTR
64% LGRiLTR
46% LTRi4"x6"
Fit to Page
Custom(25-400%)
h
If you do not want to change additional
settings, press Black Start or
Color Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Page Layout, Book Copy, Sort,
Thin Paper Copy and
Watermark Copy are not available with
Fit to Page.
• Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
• Fit to Page is not available for a Legal
size document.
• When using Ledger or A3 size paper,
1sidei2side and 2sidei2side of
Duplex Copy is not available with
Enlarge/Reduce.