Installing The Remote Printer Console; Using The Remote Printer Console Main Program - Brother Model 5750e Owner's Manual

Installing the Remote Printer Console

Before you install the program, make sure you have the following hardware and
software to install the program:
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1
Make sure your Brother machine is connected to your computer and is set to
Online.
2
Start your computer and go to the DOS prompt. If you are in Windows
and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-ROM
drive for "x"), and then press Enter.
C:\>x:
5
Type CD DOS, and then press Enter.
x:\>CD DOS
6
Type RPCSETUP, and then press Enter.
x:\DOS>RPCSETUP
7
Follow the instructions in the installer.

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX, and then press the Enter key to start the Remote
Printer Console main program.
Do not use this program from a DOS window running under Windows.
F O R D O S U S E R S ( F O R F A X - 5 7 5 0 E O N L Y )
®
, exit
13 - 2