Inserting Originals For Copying (And Scanning); Using The Adf (Automatic Document Feeder); Recommended Environment - Brother DCP-1000 Owner's Manual

Inserting Originals for Copying (and Scanning)

You can copy and scan from the ADF (Automatic Document Feeder) or from
the scanner glass.

Using the ADF (Automatic Document Feeder)

The ADF can hold up to 30 pages, feeding each one individually through the
machine. Use standard (20 lb/75g/m
the pages well before placing them in the ADF.

Recommended Environment

Temperature:
Humidity:
Paper:
DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples,
paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or
fabric. (To fax this kind of document, see
I
Make sure documents written with ink are completely dry.
I
Originals must be from 5.8 to 8.5 inches wide, and 5.8 to 14 inches long.
1
Pull up the Document Extension.
2
Fan the pages and stagger them at a 30 degree angle. Insert the pages face up,
top edge first in the ADF until you feel them touch the feed roller.
3
Adjust the paper guides to fit the width of your original.
Originals are
Face Up
in the ADF
4
Unfold the document stopper.
1 - 4
G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R / P R I N T E R
2
68°F – 86°F (20°C – 30°C)
50% – 70%
Xerox 4200 or equivalent (20LB/LTR)
) paper when using the ADF. Always fan
Using the Scanner Glass
Document Stopper
, page 1-5.)
30°