Table of Contents
Advertisement
5
Powering On and Starting the UPS
1. Before powering on the UPS, ensure that all the items in the UPS5000 Commissioning and
Acceptance Report and Chapter 4 have been checked.
2. Measure the voltage and frequency where the external input switch is located. 380 V AC/400 V
AC/415 V AC/420 V AC voltage system: 138–485 V AC (line voltage), 480 V AC voltage system:
192–528 V AC (line voltage), and the frequency range is 40–70 Hz.
3. Before you power on the UPS, check that all external switches are OFF.
5.1
Powering On the UPS
5.2
Initial Startup
•
If the UPS is powered on for the first time, you need to obtain the startup password from the
Service Expert app. Skip this step if the UPS is not powered on for the first time.
•
The Service Expert app can be downloaded from Google Play Store and can run on Android.
1. Obtain the startup password.
Download and install the Service Expert app.
On the app home screen, tap StartUp to access the Set Startup screen.
Insert the WiFi module into the USB port on the
MDU. Enable the mobile phone WLAN, search
for the UPS_WIFI signal, and connect to the
WiFi signal. The password is Changeme.
Set the Site and Device Type as required, and
connect the device. Set IP to 192.168.0.10, Port
to 443, Username to admin, Password to
Changeme, and click Login.
After login, tap Power-on password activation
on the screen. A message is displayed,
indicating whether to start the UPS. Tap OK.
Close the external bypass and mains input switches.
After the UPS is powered on, it starts initialization. The LCD
displays the Huawei logo and an initialization progress bar.
Use the app to
start the UPS
online?
Yes
No, start the
UPS offline
Set Site and Device Type as required,
and tap Offline Activation.
Enter Bar code and Verification code
obtained from the LCD on the Offline
Activation screen. Tap Generate PWD to
generate a startup password.
Enter the generated password in the
password textbox on the LCD to start the
UPS.
8
Advertisement
Table of Contents
