3.1
UPS Cable Connection Reference
•
Prepare cables away from the cabinets to prevent scraps from falling inside. Cable scraps may
ignite and cause personal injury or device damage.
•
After cables have been installed, clean the cabinet in a timely manner. Ensure that there is no
foreign matter inside and around the cabinet.
3.2
Installing Cables
1. Open the front door of the bypass cabinet,
and remove front power distribution covers.
2. Remove the cover from the top of the bypass
cabinet based on the cable route and cable
dimensions.
1
2
(1) Cover for power cables
(2) Signal cable hole
4